STM32F0 RTC using HSE/32 as the timing source

This is only a short post really. With my watch, I’d been trying for AGES to try and get the RTC working with the external crystal. It might seem simple to some but it was certainly not simple to me and ST don’t give an example, unlike most things; in their standard peripheral downloadable pack. I […]

Altera CPLD development board

Well! I’ve been looking to further develop my VGA controller on my CPLD. So as per, I’ve been researching into methods and what not and found out that 800×600 at a refresh rate of 72Hz uses a standard pixel clock of 50MHz! This is obviously in comparison to many other VGA modes which seem to […]